Just curious!

[Alfa_Lupus]

Hello again!

When it comes to building, are you guys going to stick strictly to blocks? Or would you offer different shaped blocks, which would be a much better option (half blocks, wall blocks, stairs, slopes, circles, etc.)

Also, is physics going to be in there is some form? To avoid floating blocks and unrealistic overhangs.

Thanks again!

[Rukio]

There are half blocks, angled blocks, etc. Right now the system is a little wonky but it works! It’s determined by if you have a material that is naturally deformed (Sand for example), then depending on which slot it is in, you will be able hold CTRL and it will come out in the shape depending on the slot.

[Alfa_Lupus]

So it depends on it’s environment? You cannot choose from a selection of prefabs?

[Rukio]

There are natural blocks, like rocks, gravel, sand, dirt, and also refined blocks that are perfectly square. At the moment you can only alter the natural blocks. I THINK. I’ve not messed with it too much but Luca was explaining it a bit more.

I grabbed his post for ya!
There’s no final controls for these yet at all, but you can get them (carefully) by placing a slope-type block like sand in one of the first set of quick-use slots, and hold CTRL as you place it.
But be careful, CTRL+W is a common browser shortcut to close a tab 🙂
from 1-6 it goes full block, diagonal block, small corner block, large corner block, saddle shape, pyramid style corner block

[Alfa_Lupus]

Thank you 🙂

[Author]

Posts